Characteristics
The particularly well-designed coating is made from very low-density closed cell expanded polyethylene and guarantees an excellent resistance to the spread of water vapour with a subsequent reduction in the formation of humidity on the outer surface of the tube.
The coating is odourless, non-toxic and made without the use of CFCs. Its external surface is corrugated giving further mechanical protection. It is classified as Class 1 fire resistant and is suitable for use in plants with operating temperatures ranging from -80°C to +98°C.
The Condy Pro copper tube is supplied in 50-metre coils marked at intervals also indicating the relative metres.
The core of the Condy Pro is the SILMET copper tube manufactured according to the European standard EN 12735-1 and with a level of internal cleanliness that also complies with standard ASTM B280.
Supply
It is supplied with caps at the ends to retain the high level of cleanliness of the internal surface required for installation.
INSULATION DENSITY | 45 kg/m3 |
THICKNESS OF THE INSULATING SHEATH | da 7,5 a 10 mm |
USAGE TEMPERATURE | -80 °C +120 °C |
WATER VAPOUR DISPERSION COEFFICIENT | 5482 |
THERMAL CONDUCTIVITY | 0,0397 W · m-1 · K-1 |
FIRE RESISTANCE | Class 1 (self-extinguishing) |
WRAPPING | coils individually wrapped with transparent film giving further protection |
Techincal data
Alloy | Cu-DHP CW024A (Cu = 99,90% min. - P = 0,015 ÷ 0,040%) |
Physical state | Annealed |
Unit tensile strength | 220 MPa/mm2 min. |
Percentage elongation | 40% min. |
Internal cleanliness | C max. 0,20 mg/dm2 |
Dimensions and tolerances | In compliance with standard EN 12735-1 |
Internal surface roughness | RA 1/10 di micron |
Linear thermal expansion coefficient | 0,00168 mm/m °C |
Thermal conductivity at 20° | 364 W/m · K |
dimensions without insulation | dimensions with insulation | thickness of insulating sheath | bursting pressure | operating pressure | coil length | water content per meter |
mm | mm | mm | MPa | MPa | m | l/m |
thickness 0,80 mm | ||||||
6,35 X 0,80 – 1/4" | 21,35 | 7,5 | 56,54 | 14,14 | 50 | 0,0177 |
9,52 X 0,80 – 3/8" | 25,52 | 8 | 37,71 | 9,43 | 50 | 0,0493 |
12,70 X 0,80 – 1/2" | 32,7 | 10 | 28,27 | 7,07 | 50 | 0,0968 |
15,87 X 0,80 – 5/8" | 35,87 | 10 | 22,62 | 5,66 | 50 | 0,1599 |
thickness 1 mm | ||||||
6,35 X 1 – 1/4" | 21,35 | 7,5 | 70,68 | 17,67 | 50 | 0,0149 |
9,52 X 1 – 3/8" | 25,52 | 8 | 47,14 | 11,79 | 50 | 0,0444 |
12,70 X 1 – 1/2" | 32,7 | 10 | 35,34 | 8,83 | 50 | 0,0899 |
15,87 X 1 – 5/8" | 35,87 | 10 | 28,28 | 7,07 | 50 | 0,1511 |
19,05 X 1 – 3/4" | 39,05 | 10 | 23,55 | 5,89 | 50 | 0,2286 |
22,22 X 1 - 7/8" | 42,22 | 10 | 20.20 | 5.05 | 25 | 0.3211 |
dimensions Ø x thickness | coil length | coils per pallet | meters per pallet | approx. gross pallet weight | dimensions of pack |
mm | m | n | m | kg | cm |
thickness 0,80 mm | |||||
6,35 X 0,80 - 1/4" | 50 | 16 | 800 | 128 | h 220 X Ø 80 |
9,52 X 0,80 - 3/8" | 50 | 14 | 700 | 162 | h 220 X Ø 80 |
12,70 X 0,80 - 1/2" | 50 | 15 | 750 | 225 | h 220 X Ø 80 |
15,87 X 0,80 - 5/8" | 50 | 12 | 600 | 227 | h 220 X Ø 90 |
thickness 1 mm | |||||
6,35 X 1 - 1/4" | 50 | 16 | 800 | 150 | h 220 X Ø 80 |
9,52 X 1 - 3/8" | 50 | 14 | 700 | 190 | h 220 X Ø 80 |
12,70 X 1- 1/2" | 50 | 15 | 750 | 290 | h 220 X Ø 80 |
15,87 X 1 - 5/8" | 50 | 12 | 600 | 288 | h 220 X Ø 90 |
19,05 X 1 - 3/4" | 50 | 10 | 500 | 285 | h 220 X Ø 90 |
22,22 X 1 - 7/8" | 50 | 20 | 500 | 328 | h 220 X Ø 90 |
The packs cannot be stacked.
A maximum of 2 packs with a large diameter (h 220 x Ø 90 cm) and available for other coated products, are loaded onto the pallet side-by-side together with a third smaller pallet.
The others can be loaded side-by-side in threes.